Drop Controller DIY

Standard

One of the things that was evident after my week of playing with drops is that I think I had reached a limit with my current drop controller…

A while back I had bought two extra valves and spent not a small amount of time trying to set them up without a lot of success…

Problem being that without having almost macro rail micro adjustability on the valves to get the drops to land at the same time you need to be able to control each valve individually… unfortunately the HiViz controller doesn’t have that functionality so I just put the valves away and up until ‘drip week’ I hadn’t touched the drip rig at all…

Did some research and came across a guy called Martyn that had built his own controller on a breadboard using an Arduino Nano to control it… the spec was appealing… there was a PC app and an Android app to control it using USB or Bluetooth… individual control of valves, proper fine control over time and drop size values and totally DIY… was right up my street and was also very cheap to build parts wise…

I ordered up a load of parts…
Drop Controller DIY

The site has a guide for building a breadboard version and a perf board version… circuit diagrams were essentially the same but the breadboard version had a couple of nice extras so decided to use vero board instead and pick and choose between both circuit diagrams to build what I wanted…

Meant that I had to design the layout on the fly but to be honest thats half the fun 🙂
Drop Controller DIY

The vero boards I bought weren’t quite large enough for all the components but that was no bad thing… completed the PSU, valve, camera and flash control circuits on the one board… decided it was a good time to power up and test that it would hold its blue smoke in…

Drop Controller DIY

I used a second board for the Arduino Nano and Bluetooth board (which took a little time to arrive) and then using the Arduino IDE I loaded the ‘Sketch’ that Martyn had already written..
Drop Controller DIY

As I was waiting for the Bluetooth module I used the PC software over USB to test the controller

Happy with that…

A couple of days later the BT module turned up so did a quick test of the app and all was good…
Drop Controller DIY

Only thing I didn’t have at the moment was a project case as I wasn’t sure how much room the vero boards would take up once complete… it was while having a well deserved takeaway…
Drop Controller DIY

…that I had an idea 🙂
Drop Controller DIY

Sorted! 😀

On the subject of ‘ideas’… I had been looking at a better way to manage gels on the flashes… the lighting gel I was using was cheap enough so needed a suitably cheap solution… the various slide in filter housings were mostly around a tenner each… I had four flash guns so 40 quid seemed a bit excessive… I then found some perspex place name holders that were pretty much the perfect shape… less than a quid each too…

They needed a little bit of work to be where I wanted them…
Drop Controller DIY

So using a heat gun I carefully warmed the plastic up to bend it to the position I wanted..
Drop Controller DIY

..and cut the lighting gel to the right size… result 🙂
Drop Controller DIY

Time for a proper test… hooked up the controller..
Drop Controller DIY

Just used two flashes, one valve and plain water to test the controller… wanted to keep it simple so as not to introduce too many variables to the test..

The video shows the flashes in front bouncing off the plexi background but lighting wasn’t quite right so changed them to fire through a frosted piece instead…
Drop Controller DIY

Dialling in was much much easier… was nice having so much precision over the control… the increment/decrement feature is brilliant… takes far less shots to get results and tapping away at the app over Bluetooth just seems more efficient…

Most of the shots I took were just faffing about to get a feel for the hardware and software… I did process out a couple though just because…
Drop Controller DIY

Drop Controller DIY

Very happy with the results so far… looking forward to experimenting more and the next step is to add the other two valves in and see how that goes…

Some useful links…

Martyn’s drop controller website if you fancy having a go yourself…
http://www.dropcontroller.com/

Arduino website…
https://www.arduino.cc/

Martyn’s own site containing some nice info on Arduino stuff
http://www.martyncurrey.com/

<tuffty/>

Random post out the nowhere! (the sequel)

Standard

Been a little while since I have posted so here we go 🙂

Been playing with macro and the drip kit for most of the month, I also went to another race meet… so in no particular order here are a few select images from the month..

Random post out the nowhere! (the sequel)

This image has been shortlisted to be in a photography magazine… not heard if it will be included but the recognition is welcome even if it doesn’t
Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

A few macro shots….
Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

A few of the racing…
Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Finally the kittens first day in the garden…
Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

Random post out the nowhere! (the sequel)

I have been praying for a clear night seeing as the sun is getting lower and the nights are drawing in… looking forward to getting back into nightscapes…

<tuffty/>

Random post out the nowhere!

Standard

Been quite busy recently hence lack of updates so here is a biggish one…

I have had a week off work to clear up my office which quite frankly had turned into a tip…

Office Cleanup

Office Cleanup

No real excuse other than general laziness so felt it was about time I actually did something about it… so after removing 8 old PC’s, 4 old laptops, recycling no end of boxes and paper, 12 big bin bags of rubbish and what seemed like an eternity of paper shredding I got the ‘living’ space somewhere handy…

Office Cleanup

Office Cleanup

Well worth the effort although I do have a little more to do yet but I have at least broken the back of the job and the rest should be relatively easy to manage…

In other news I have been playing with electronics…. its been a fair few years since I have done any serious electronic project assembly but armed with a kit of parts I built a drip controller and trigger unit to do splash photography… I won’t bother going into detail as I’ll post links at the bottom with all the info but here are a few pics…

Drip controller…
Drip Kit

Drip Kit

Drip Kit

Drip Kit

Drip Kit

Drip Kit

Drip Kit

Multi-trigger
Drip Kit

Drip Kit

The multi trigger has essentially one output to trigger a flash so as I need the ability to trigger more than that I made a distribution ‘manifold’ to fire up to 5 flashes simultaneously… I do have wireless triggers but there is a small amount of lag in firing that can be tricky to dial out so this will alow the flashes to be triggered via PC Sync…

Drip Kit

Drip Kit

The setup is a little heath robinson at the moment while I refine it but it does work as you will see in a bit…
Drip Kit

The setup works like this… the drip controller can release up to three drips per triggered event and you control the size and time between drips to create different collision effects… the multi-trigger uses an optical interrupter to trigger a delay before firing the the flashes… the camera can be triggered from either control unit but I am using the splash controller as this seems to work best in dealing with the inherent shutter lag of a DSLR.

The flash guns are set to manual at a speed of 1/64 to be able to freeze the splashes with minimum motion blur.

Using a suitable tray full of water and a background of some description you fire the flashes at that to bounce light back to the splash…

In fairness its a little more involved than that but this isn’t a tutorial, there are plenty of those on the web and a fantastic e-book I got from Corrie White who does some amazing Liquid Drop Art (links at the end) which has great info in it…

So, spent a bit of time playing with the settings trying to dial the rig in… this took me a little bit of time and god knows how many images but here are a few of my initial results…

Using square patterned wrapping paper as a background…
Liquid Drop Art

Liquid Drop Art

Using very reflective shiny red wrapping paper as a background…
Liquid Drop Art

Liquid Drop Art

Just using a frosted perspex background…
Liquid Drop Art

Liquid Drop Art

Finally a go at reflection…
Liquid Drop Art

Unfortunately the water was getting a little dusty at this point so not the best image but it was more to learn the technique than anything…

Pleased with the results and absolutely knackered from humping a ton of crap from the loft to the car and then to the recycling centre… I feel that this week I have single handedly saved the planet… and I didn’t have to wear sandals to do it either 😉

More drip art very soon 😀

Links:
Drip controller kit
Corrie White (Liquid Drop Art)
Drop photography guide

<tuffty/>